 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TGL41-6.8 THRU TGL41-200A SURFACE MOUNT TRANSZORBTM TRANSIENT VOLTAGE SUPPRESSOR Breakdown Voltage - 6.8 to 200 Volts Peak Pulse Power - 400 Watts FEATURES DO-213AB SOLDERABLE ENDS 1st BAND D2 D1= 0.105 0.095 (2.67) (2.41) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185(4.7) 1st band denotes type and positive end (cathode) 0 D2 = D1 + 0.008 (0.20) - Plastic package has Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Glass passivated junction Excellent clamping capability Low incremental surge resistance Fast response time typically less than 1.0ps from 0 Volts to V(BR) 400W peak pulse capability with a 10/1000s waveform, repetition rate (duty cycle): 0.01% For devices with V(BR)10V, ID are typically less than 1.0A High temperature soldering guaranteed: 250C/10 seconds at terminals MECHANICAL DATA Case: JEDEC DO-213AB molded plastic body over passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Blue bands denotes the cathode which is positive with respect to the anode under normal TVS operation Mounting Position: Any Weight: 0.116 gram, 0.0046 ounce Dimensions in inches and (millimeters) Available in uni-directional only MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. RATINGS SYMBOL VALUE UNITS Peak pulse power dissipation with a 10/1000s waveform (NOTE 1, FIG. 1) Steady state power dissipation at TL=75C (NOTE 2) Peak pulse current with a 10/1000s waveform (NOTE 1, FIG. 3) PPPM PM(AV) IPPM Minimum 400 1.0 SEE TABLE 1 Watts Watt Amps Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load for unidirectional only (JEDEC Method) (NOTE 3) Maximum instantaneous forward voltage at 25A for unidirectional only Operating junction and storage temperature range IFSM 40.0 Amps VF TJ, TSTG 3.5 -55 to +150 Volts C NOTES: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25C per Fig. 2 (2) Mounted on copper pads to each terminal of 0.31 in (8.0 mm ) per Fig. 5 (3) Measured at 8.3ms single half sine-wave or equivalent square wave duty cycle=4 pulses per minute maximum 2 2 1/20/99 ELECTRICAL CHARACTERISTICS at (TA=25C unless otherwise noted) TABLE 1 Breakdown Voltage V(BR) (Volts) (NOTE 1) Device Type MIN MAX Stand-off Voltage VWM (NOTE 4) Test Current at IT (mA) Maximum Reverse Leakage at VWM ID (A) (NOTE 4) Maximum Peak Pulse Current IPPM (NOTE 2) (Volts) (Amps) Maximum Clamping Voltage at IPPM VC (Volts) Maximum Temperature Coefficient of V(BR) (% / C) TGL41-6.8 TGL41-6.8A TGL41-7.5 TGL41-7.5A TGL41-8.2 TGL41-8.2A TGL41-9.1 TGL41-9.1A TGL41 -10 TGL41 -10A TGL41 -11 TGL41 -11A TGL41-12 TGL41-12A TGL41-13 TGL41-13A TGL41-15 TGL41-15A TGL41-16 TGL41-16A TGL41-18 TGL41-18A TGL41-20 TGL41-20A TGL41-22 TGL41-22A TGL41-24 TGL41-24A TGL41-27 TGL41-27A TGL41-30 TGL41-30A TGL41-33 TGL41-33A TGL41-36 TGL41-36A TGL41-39 TGL41-39A TGL41-43 TGL41-43A 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 1000 1000 500 500 200 200 50.0 50.0 10.0 10.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 37.0 38.1 34.2 35.4 32.0 33.1 29.0 29.9 26.7 27.6 24.7 25.6 23.1 24.0 21.1 22.0 18.2 18.9 17.0 17.8 15.1 15.9 13.7 14.4 12.5 13.1 11.5 12.0 10.2 10.7 9.2 9.7 8.4 8.8 7.7 8.0 7.1 7.4 6.5 6.7 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 0.060 0.060 0.064 0.064 0.068 0.068 0.071 0.071 0.076 0.076 0.078 0.078 0.081 0.081 0.084 0.084 0.087 0.087 0.089 0.089 0.091 0.091 0.093 0.093 0.095 0.095 0.097 0.097 0.099 0.099 0.100 0.100 0.101 0.101 0.102 0.102 0.103 0.103 0.104 0.104 ELECTRICAL CHARACTERISTICS at (TA=25C unless otherwise noted) TABLE 1 (Cont'd) Breakdown Voltage V(BR) Volts (NOTE 1) Device Type MIN MAX Maximum Reverse Leakage at VWM ID (A) Maximum Peak Pulse Current IPPM (NOTE 2) Test Current at IT (mA) Stand-off Voltage VWM (Volts) (Amps) Maximum Clamping Voltage at IPPM VC (Volts) Maximum Temperature Coefficient of V(BR) (% / C) TGL41-47 TGL41-47A TGL41-51 TGL41-51A TGL41-56 TGL41-56A TGL41-62 TGL41-62A TGL41-68 TGL41-68A TGL41-75 TGL41-75A TGL41-82 TGL41-82A TGL41-91 TGL41-91A TGL41-100 TGL41-100A TGL41-110 TGL41-110A TGL41-120 TGL41-120A TGL41-130 TGL41-130A TGL41-150 TGL41-150A TGL41-160 TGL41-160A TGL41-170 TGL41-170A TGL41-180 TGL41-180A TGL41-200 TGL41-200A 42.3 44.7 45.9 48.5 50.4 53.2 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90.0 95.0 99.0 105.0 108.0 114.0 117.0 124.0 135.0 143.0 144.0 152.0 153.0 162.0 162.0 171.0 180.0 190.0 51.7 49.4 56.1 53.6 61.6 58.8 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100.0 95.50 110.0 105.0 121.0 116.0 132.0 126.0 143.0 137.0 165.0 158.0 176.0 168.0 187.0 179.0 198.0 189.0 220.0 210.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102.0 105.0 111.0 121.0 128.0 130.0 136.0 138.0 145.0 146.0 154.0 162.0 171.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.9 6.2 5.4 5.7 5.0 5.2 4.5 4.7 4.1 4.3 3.7 3.9 3.4 3.5 3.1 3.2 1.39 1.46 1.27 1.32 1.16 1.21 1.07 1.12 0.93 0.97 0.87 0.91 0.82 0.85 0.78 0.81 0.70 0.73 67.8 64.8 73.5 70.1 80.5 77.0 89.0 85.0 98.0 92.0 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 0.104 0.104 0.105 0.105 0.106 0.106 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.109 0.109 0.109 0.109 0.110 0.110 0.110 0.110 0.110 0.110 0.111 0.111 0.111 0.111 0.111 0.111 0.111 0.111 0.111 0.111 NOTES: (1) V(BR) measured after IT applied for 300s square wave pulse or equivalent (2) Surge current waveform per Figure 3 and derate per Fig.2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 RATINGS AND CHARACTERISTIC CURVES TGL41-6.8A THRU TGL41-200A FIG. 1 - PEAK PULSE POWER RATING CURVE NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG. 3 TA=25C FIG. 2 - PULSE DERATING CURVE PEAK PULSE POWER (PPP) or CURRENT (IPP) DERATING IN PERCENTAGE, % 100 PPPM, PEAK PULSE POWER, kW 100 75 10 TGL41-6.8 TGL41-91A 50 1.0 TGL41-100 TGL41-200A 25 0.1 0.1s 1.0s 10s 100s 1.0ms 10ms 0 0 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE, C td, PULSE WIDTH, sec. FIG. 4 - TYPICAL JUNCTION CAPACITANCE 10,000 TJ=25C f=1.0 MHz Vsq=50MVpp FIG. 3 - PULSE WAVEFORM 150 CJ, JUNCTION CAPACITANCE, pF IPPM, PEAK PULSE CURRENT, % tr=10sec TA=25C PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IPP MEASURED at ZERO BIAS 1,000 100 PEAK VALUE IPPM HALF VALUE - IPP 2 50 10/1000sec. WAVEFORM as DEFINED by R.E.A. 100 MEASURED at STAND-OFF VOLTAGE, VWM td 0 0 1.0 2.0 t, TIME, ms 3.0 4.0 UNIDIRECTIONAL 10 1.0 10 100 200 V(BR), BREAKDOWN VOLTAGE, VOLTS FIG. 5 - STEADY STATE POWER DERATING CURVE PM(AV), STEADY STATE POWER DISSIPATION, WATTS 1.00 60 HZ RESISTIVE OR INDUCTIVE LOAD FIG. 6 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY IFSM, PEAK FORWARD SURGE CURRENT, AMPERES 50 40 30 20 10 0 0.75 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=TJ max. 0.50 0.31 x 0.31 x 0.08" COPPER PADS (8 X 8 x 2mm) 0.25 0 0 25 50 75 100 125 150 175 200 TL, LEAD TEMPERATURE,C 1 10 NUMBER OF CYCLES AT 60 HZ 100 |
Price & Availability of TGL41-11
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |